EXTRA 19" R- PERFORATION EXPORT SERVER RACK 42U, 60x110 cm.

ES-4261 EXTRA 19" R- PERFORATION EXPORT SERVER RACK 42U, 60x110 cm. - Views 1236
19" Extra Perforated Rack Design and product Modular knock down system.
Which is very easy to assemble remove the rack.
- Material made of electro galvanized sheet steel 1.5mm.thickness.Mounting Pole,
Frame Structure and Base made of 2.0mm. Caster stand made of 3.0mm.
steel 100% rust-proof and durable.
- The roof of rack can be install ventilating fan 1 ea. to 6 ea. Maximum (1x4", 2x4", 3x4").
It is vented raised roof cover. Slide shutter for cable can additional (Option).
- The inside of rack can be built the PL.7w. light and limit switch for
automation lighting on-off when open and close rear door(Option).
- The front door is laminated clear glass or acrylic with Perforated Vented along
the door's edges and Luxury black Swivel Handle lock or turn lock.
- The rear door has two key locked (27U up) and square or slot holes perforated ventilation if door's
area to prevent increase heat inside to extend the life of all network equipment and servers.
- The bottom rack have slide shutter for cable and protection intrusion of animal.
Ventilation fan can additional (Option).
- The side panel security with security lock is turn lock and Slide latch can be quick
release for install or maintenance.
- Mounting vertical frames support is electro galvanized sheet steel 2mm. thickness,
can be adjustment as requirement Square mounting holes in compliance with extraordinary strength.
- The hinged of front-rear door made from aluminum for heavy duty
(Hardness and 100% rust-proof finish). Without any interfering noise.
- Caster made of black or white Nylon Six with the diameter of 75 mm.
equipped on the 360 degree swivel that allow to be moving conveniently
with capacity the static load 150 Kg./caster.
- Pedestal's base made of black ABS and can be freely adjustable to suit the slope
and protect all effect from static and earth leakage.
- Ground system all part of rack completed by cable 2.5 square mm. earth kit.
- Provide with M6 bolt cage nuts and plastic washers.
- Finish coat is Two-Tone with gray and black gray made of powder epoxy coating by
electro-static system for drying to enhance strength.
- Meet to with standard ANIS/EIA-310D-1992 (Rev.EIA-310-C),
IEC 60297-1, IEC 60297-2, BS 5954:Part 2, DIN 41494
- Manufacturing standard ISO 9001: 2000 Company.
Extra Rack
19" Extra Rack

 

Extra : 19” R- Perforation Export Server Rack

การออกแบบ : Extra : 19” R- Perforation Export Server Rack ถูกออกแบบและผลิต
เป็นแบบ Modular knock – down เพื่อความสะดวกในการถอดแยก และประกอบ

วัสดุ  : ผลิตจากเหล็ก Electro – Galvanized ความหนา 1.5 mm.
 ซึ่งมีความแข็งแรง และป้องกันสนิม 100%

เสายึดอุปกรณ์ : ผลิตจากเหล็ก Electro – Galvanized ความหนา 2 mm.
ซึ่งมีความแข็งแรง และป้องกันสนิม 100% สามารถปรับระยะการติดตั้งตามแนวลึกของตู้ได้

ฐาน  : ฐานตู้มีความหนา 2 mm. และฐานล้อมีความหนา 3 mm. ผลิตจากเหล็ก Electro – 
Galvanized ซึ่งมีความแข็งแรง และป้องกันสนิม 100%

หลังคา  : สามารถติดตั้งพัดลมได้ 1-6 ตัว (1x4”,2x4”,3x4”) สามารถเปลี่ยนเป็นช่องเข้าสาย
 หรือถูกออกแบบเป็นหลังคายกสูงพร้อมช่องระบายอากาศแบบ Capsule (กรณีสั่งทำพิเศษ)

ชุดหลอดไฟ : สามารถติดตั้งหลอดไฟ PL 7 w. และ limit switch ซึ่งไฟจะเปิด –
 ปิด โดยอัตโนมัติเมื่อเปิด – ปิดประตู (กรณีสั่งทำพิเศษ)

ประตูหน้า : บริเวณส่วนกลางเป็น Plastic Acrylic สีชา ความหนา 5 mm.
หรือกระจกนิรภัย ความหนา 5 mm. มีขอบยางโดยรอบขอบประตู มีรูระบายอากาศแบบ
Capsule ด้านข้างทั้ง 2 ข้างของขอบประตูแนวตั้ง พร้อมกุญแจแบบ HANDLE LOCK สีดำ
และบานพับอลูมิเนียมเพื่อความปลอดภัย สามารถติดตั้งให้เปิดปิดได้ทั้งด้านซ้ายหรือด้านขวา

ประตูหลัง : ถูกออกแบบเป็นช่องระบายแบบ Capsule ทั้งฝา พร้อมกุญแจแบบ Turn Lock
 และบานพับอลูมิเนียมเพื่อความปลอดภัย สามารถติดตั้งให้เปิดปิดได้ทั้งด้านซ้ายหรือด้านขวา

พื้นตู้ด้านใน : ด้านล่างภายในตู้มีช่องสำหรับเข้าสายพร้อมแผ่นปิดสามารถปรับระยะได้
สำหรับป้องกันสัตว์เข้าไปในตู้ สามารถติดตั้งพัดลมเพิ่มเติม (กรณีสั่งทำพิเศษ)

ฝาข้าง  : มีกุญแจแบบ Turn Lock และ Latch Lock 2 ตัว ซึ่งสะดวกสบายต่อการบำรุงรักษา

บานพับ  : ทั้งประตูหน้า และประตูหลังเป็นบานพับสีดำทำจากอลูมิเนียม
 เพื่อความแข็งแรง และป้องกันสนิม 100%

ขาปรับระดับ : มี 4 ตัว ซึ่งง่ายต่อการปรับระดับความสูงได้ตามความต้องการ

ล้อ  : มี 4 ล้อ ทำจาก Nylon Six สีขาว สามารถหมุนได้ 360 องศา และรับน้ำหนักได้ล้อละ 100 กิโลกรัม

ระบบกราวน์ : ทุกชิ้นส่วนเชื่อต่อถึงกัน ด้วยชุดสาย Earth cable kit.

สี  : เป็นสีทูโทน (สีขาวและสีเทาดำ) แบบ powder epoxy โดยใช้ระบบ Electro – Static เพื่อความแข็งแรงทนทาน

อุปกรณ์ประกอบ  : จัดส่งถึงลูกค้าพร้อมชุดน็อต M6, Cage nuts และแหวนพลาสติก
มาตรฐานผลิตภัณฑ์  : เทียบเท่ามาตรฐาน ANIS/EIA – 310D –
1992 (Rev.EIA – 310 – C), IEC 60297       – 1, IEC 60297 – 2, BS 5954 : Part 2, DIN 41494

มาตรฐานโรงงาน  : ISO 9001 : 2000

http://www.rackserverthai.com/images/rack/serverspec.jpg




sales@serverrackthai.com
Have Questions?
ขอใบเสนอราคา
จ - ศ
from 9:00 am
to 5:00pm